✅ Licensed Freight Broker
🛡️ Department of Defense Authorized Freight Broker
USDOT# 701497 | MC# 586860-P
Oregon Oversize / Overweight Trucking Permits Rules and Requirement
Oregon oversize permits phone number: 630-222-5770
Oregon Oversize permits OR Oregon Overweight Permits are required when a vehicle or its load exceeds the state feet legal size or weight limits and needs to travel on public highways. These permits ensure compliance with safety standards and protect road infrastructure.
Compare Transport LLC offers fast and reliable help with Oregon Oversize Permits and Oregon Overweight Permits. We assist with Oregon oversize overweight permits requirements, Oregon oversize overweight permits online, Oregon Single Trip Permits, Oregon Annual Permits, and Oregon Overhang Permits. Need an Oregon oversize route map, help with over dimension permits, or the Oregon oversize permits phone number? We’ve got you covered. We also handle Oregon trip permits, including temporary trip permits online, 30-day, 90-day, 21-day permits, and Oregon temporary registration permits. Get started with Compare Transport LLC today!
Oregon Legal Dimension Limit
Length:
Note: Trailers longer than 53 feet are generally prohibited unless designed to be reduced to 53 feet when unloaded or are used with jeeps or boosters.
Width:
Height:
Oregon Legal Weight Limit
The maximum allowable gross vehicle weight is up to 80,000 pounds, subject to axle configurations:
Axle weight limits Oregon
Oregon Routine Limit: Oregon Oversize and Overweight Limits
Length:
Rear Overhang:
Width:
Height:
Maximum Axle Weights With OH Overweight Permit:
Weight (based on axle configuration and spacing)
Superload Classification: Loads exceeding the following thresholds are classified as superloads and may require additional approval time:
To operate legally in Oregon, commercial carriers must secure the appropriate permits based on vehicle size, weight, and registration status. Below is a detailed guide to the validity of all key Oregon trucking permits, including oversize, overweight, superload, IRP, IFTA, TRP, and temporary trip and fuel permits.
Permit Type: Light Vehicle Trip Permit
Validity Period: 21 consecutive days
Requirement: Temporary operation for light vehicles without proper registration.
Permit Type: Annual Oversize/Overweight Permit
Validity Period: Up to 1 year
Requirement: Authorizes multiple oversize or overweight moves on permitted routes.
Permit Type: Heavy Motor Vehicle Trip Permit
Validity Period:10 consecutive days
Requirement: Temporary operation for heavy vehicles over 26,000 pounds.
Permit Type: Heavy Trailer Trip Permit
Validity Period: 10 consecutive days
Requirement: Temporary authorization for trailers over 8,000 pounds.
Permit Type: Recreational Vehicle Trip Permit
Validity Period: 10 consecutive days
Requirement: Temporary travel authorization for recreational vehicles.
Permit Type: Registration Weight Trip Permit
Validity Period: 10 consecutive days
Requirement: Allows temporary increase in registered weight.
Permit Type: Fuel Permit
Validity Period: 120 consecutive hours (5 days)
Requirement: Temporary fuel tax compliance for vehicles without IFTA credentials.
Permit Type: Specialty Permits
Validity Period: Usually up to 10 consecutive days
Requirement: Covers moves like manufactured homes or other special hauling.
Permit Type: Superload Permit
Validity Period: Typically, 5–10 consecutive days
Requirement: For extremely large or heavy loads; specific duration set per trip.
Permit Type: IRP Trip Permit
Validity Period: 72 consecutive hours (3 days)
Requirement: Temporary interstate operating authority for non-IRP registered vehicles.
Permit Type: IFTA Trip Permit
Validity Period: 120 consecutive hours (5 days)
Requirement: Temporary fuel tax compliance for vehicles without an IFTA license.
Permit Type: Fuel Tax Permit
Validity Period: 120 consecutive hours (5 days)
Requirement: Ensures fuel tax compliance during short-term operation without IFTA license.
From Labor Day to Memorial Day, vehicles can operate seven days a week, from 30 minutes before sunrise until 30 minutes after sunset. From Memorial Day to Labor Day, weekend travel is allowed only until noon on Saturdays, and no travel is permitted on Sundays, except for 14 feet wide loads. Travel is only permitted on interstate highways west of the Cascade Mountains during daylight hours. For east of the Cascade Mountains, travel is allowed on authorized highways. “Green” routes permit travel up to 10 feet wide and 12 feet wide on Interstates during nighttime hours.
In urban areas such as Portland, Salem, Eugene, Grants Pass, and Medford, as well as non-interstate highways, travel of loads exceeding 12.90 meters or 70 feet in width is prohibited. In Portland, travel on I-5 between the WA line and the OR217 junction, and in Medford on I-5 between exits 24 and 33, is restricted. Additional curfews for loads wider than 14 feet may apply between 3:00 PM and 6:00 PM—please refer to the provision sheet for specific curfew zones.
Oregon adheres to the Federal Bridge Formula, which sets specific weight limits for bridges. Large road restrictions include, but are not limited to:
The Frost Law applies in many Canadian provinces and U.S. states. Specific restrictions on oversized load permits may be listed depending on the load’s type and nature in Oregon.
Movement Restrictions for Vehicles Over 8′ 6″ in Width:
The movement of oversized vehicles is prohibited when:
Large Size Tire Regulations:
Tires must be in good operational condition, properly inflated, and have a minimum tread depth of 2/32 inches.
Vehicles carrying oversized loads must be equipped with amber warning lights mounted on the vehicle’s roof.
On Interstate and Multi-lane Highways:
Annual permits for extended length and weight allow 48 feet trailers on certain restricted highways, including U.S. 395 between Pendleton and John Day, and Oregon Route 25. These permits also authorize divisible loads exceeding 80,000 pounds. They can be purchased in person at DMV offices for $8.00 or arranged through the Permit Office, which can order the permit to be picked up by the driver at a specific DMV location or Port of Entry (POE). If a dozer blade needs to be detached and carried on the same trailer with the dozer, it is permitted as long as the load is still overdimensional with or without the blade. The permit must specify “Dozer blade removed and reloaded.”
All wide loads and vehicles exceeding 80 feet in overall length must display “Oversize Load” signs at the front of the tractor and the rear of the load or trailer. If traveling at night, the signs must be reflective. Flags are required at the outermost edges of all wide loads. During nighttime travel, the extremities of the load must be illuminated with lamps or marker lights—amber lights facing forward and, on the sides, and red lights facing the rear. Any rear overhang of 4 feet or more must be marked with a flag during daylight hours or with red lights during darkness or when visibility is less than 500 feet. When traveling on a two-lane highway with a width over 10 feet, or on a multilane highway with a width over 12 feet, amber warning lights are required on the cab unless the vehicle is accompanied by at least two pilot cars. For complete specifications, refer to Oregon Provision Sheet 82A
The permit is required for vehicles that exceed the standard-length limit. It enables the transportation of longer goods, such as huge beams or pipes, while maintaining their safety and legality.
Oregon Single trip permits are normally valid for one trip and is often necessary for trucks that do not have a regular IFTA (International fuel tax agreement) in place and IRP (International Registration Plan) registered. It enables the truck to drive through particular countries while remaining compliant with fuel tax requirements.
The permit is required when a load exceeds the rear or front of the vehicle. It guarantees that the overhanging weight is delivered securely, without endangering other road users.
A permit is necessary for vehicles that exceed the normal width limitations. It enables the transportation of larger loads, such as massive equipment or prefabricated constructions, while maintaining their safety and legality.
Oregon oversize permits information including legal dimensions, routine permit limits, and escort requirements, operating times and restricted travel.
In Oregon, oversize regulations govern the movement of vehicles and loads that exceed standard legal dimensions and weights. Vehicles exceeding 8 feet 6 inches in width, 14 feet in height, 40 feet in single vehicle length, or 53 feet for semi-trailers generally require an oversize permit.
A PUC (Public Utility Commission) permit in Oregon, also known as a Heavy Motor Vehicle Trip Permit, authorizes the operation of unregistered motor vehicles with a registration weight (loaded or combined) exceeding 8,000 pounds, as well as self-propelled fixed-load vehicles regardless of their weight.
Oregon oversize permits can be obtained online through our website comparetransportll.com or by calling us at 630-222-5770
Permits are needed for any vehicle or load in Oregon that exceeds legal size or weight limits. This includes oversize, overweight, and unregistered commercial vehicles, as well as specific equipment like cranes or heavy construction machines.
Attachment 70A in Oregon refers to specific detailed provisions and regulations that are attached to oversize or overweight permits. It outlines operating conditions, routes, restrictions, and escort requirements for certain loads.
In Oregon, PUC stands for Public Utility Commission. The PUC oversees transportation operations, including the issuance of permits for heavy vehicles, ensuring safety and compliance with state laws.
Applications for Oregon oversize permits can be submitted online via our website comparetransportll.com or by calling us at 630-222-5770
An Oregon Class B commercial driver’s license (CDL) allows drivers to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or any such vehicle towing another vehicle not exceeding 10,000 pounds GVWR.
In Oregon, the maximum width allowed without an oversize permit is 8 feet 6 inches. Anything wider than that requires a special oversize permit.
Oregon’s permit rules require that any load exceeding legal dimensions or weight must secure a proper oversize or overweight permit before traveling. Specific operating times, routes, and escort vehicles may also be mandated, depending on the load.
Yes, Oregon requires trip permits for commercial vehicles that are not registered in the state or for those operating temporarily with heavier loads or larger dimensions.
The phone number for assistance is 630-222-5770.
The cost of an Oregon overweight permit varies depending on the weight and distance traveled. Typically, it starts around $8 for a base permit and increases based on ton-miles.
Oversize permits in Oregon usually start at approximately $8 to $15 for basic trips, but the final cost can vary based on the load's size, route, and duration.
To get your Oregon oversize permits fast and at competitive prices, contact Compare Transport LLC at (630) 222-5770. Their experienced team will handle all permit types across the U.S. and Canada.
Similar to oversize permits, overweight permit pricing in Oregon starts around $8 but can go higher depending on the total weight and mileage involved.
Oregon’s oversize law requires vehicles that exceed standard dimensions (8’6” wide, 14’ high, 40’ long single vehicles, or 53’ trailers) to secure permits before travel. Rules about travel times, escort vehicles, and allowable roads must be followed to maintain safety.
In most cases, oversize loads are restricted to daylight travel hours in Oregon. However, under specific conditions and with proper permit endorsements, limited nighttime movement may be allowed.
Yes, you can get Oregon oversize permit online by calling us at 630-222-5770.
An oversize permit in Oregon typically costs between $8 and $15 for a single trip. Prices may vary based on the type of load and travel distance.
Any vehicle or load in Oregon that exceeds 8 feet 6 inches in width, 14 feet in height, 40 feet in length (for single vehicles), or 53 feet in length (for semi-trailers) is considered oversized and requires a special permit to operate legally.
You can log in to manage your Oregon oversize permit through Our website comparetransportll.com
