Single Trip Permits for Oversize/Overweight Loads – Fast & Affordable Trucking Services in US and Canda

Single Trip Permits For your Oversize/Overweight Load started today! We handle the entire process so you don’t have to. Call Us at (630) 222-5770 OR (630) 800-3474

Single Trip Permits

Single Trip Permits for oversize/overweight load OR a Temporary Trip Permit for registration or fuel tax compliance (IRP/IFTA) for all U.S. states and Canadian provinces? We help truckers and carriers obtain Trucking Permits or services quickly and affordably. Whether you’re hauling heavy equipment, wide loads, or overlength trailers, we’ve got you covered

What is a Single Trip Permit?

A Single Trip Permit is a temporary permit that authorizes the movement of an oversize or overweight vehicle along a designated route. This permit is issued for a specific vehicle, load, and time period usually covering a one-time entry and exit within a state or province. It applies to loads that exceed legal dimensions, such as width, height, length, or gross weight limits.

Why and when do I need a Single Trip Permit?

You need a Single Trip Permit when transporting an oversized or overweight load that does not comply with standard vehicle limits and is not frequently hauled. These permits are essential for legal transport of non-divisible loads on public roads, especially when crossing state or provincial boundaries.
You’ll likely need a Single Trip Permit if:

  • You’re moving heavy equipment like bulldozers, cranes, or farm machinery
  • Your vehicle and load exceed legal weight or size limits for a route
  • You’re making a one-time delivery or temporary haul
  • You’re crossing into a jurisdiction where your vehicle is not currently registered or permitted

By obtaining a Single Trip Permit, you reduce the risk of fines, delays, or safety violations during your haul.

What is a Temporary Trip Permit?

A Temporary Trip Permits is a short-term authorization that allows a commercial vehicle to travel in a state or province where it is not currently registered under the International Registration Plan (IRP). Instead of acquiring full registration, carriers can use a temporary trip permit to operate legally for a limited time typically up to 72 hours.
These permits are essential for interstate or cross-border hauls when IRP registration is not practical or immediately available. They ensure legal compliance and help avoid costly fines or roadside delays.

Are Single Trip Permits and Temporary Trip Permits the same?

Most U.S. states issue Single Trip Permits for oversize or overweight loads, which are valid for one specific journey. Some states also offer Temporary Trip Permits, but these are typically used for registration or fuel tax compliance (IRP/IFTA), not for oversize dimensions.
Although both permits are temporary in nature, they serve different purposes.
A Single Trip Permit is issued for oversize or overweight loads, allowing one-time travel on a designated route. In contrast, a Temporary Trip Permit is used for registration compliance, allowing a vehicle without IRP or IFTA credentials to operate legally in a state or province for a short period.
In most cases:

  • Single Trip Permit: Used for hauling an oversize or overweight load
  • Temporary Trip Permit: Used when entering a jurisdiction and you are not register in IFTA and IRP

What is the permit limit for oversize or overweight loads?

  • The maximum legal gross vehicle weight without a permit is 80,000 pounds.
  • Single axle weight limit is 20,000 pounds.
  • Tandem axle weight limit is 34,000 pounds.
  • Loads exceeding these weight limits require an overweight permit.
  • Standard maximum dimensions without a permit are:
    Width: 8 feet 6 inches
    Height: 13 feet 6 inches to 14 feet (varies by state)
    Length: 53 feet for a trailer; overall length limits vary by state
  • Any load that exceeds these dimensions or weight limits is considered oversize or overweight and requires a special permit.

How long is a single trip permit valid?

  • A single trip permit is typically valid for 5 days in most states.
  • Some states, such as California and Minnesota, offer up to 7 days validity.
  • In a few cases like Georgia, permits can be valid for up to 10 days, sometimes with special approval.
  • The validity is based on a specific route and timeframe, and extensions usually require re-approval.

What is the cost of a single trip permit?

Fees vary by state, load dimensions, weight, and distance traveled Although most common base fee is $15–$60 per trip, overweight loads add $5 $10 per axle or per 1,000 lbs over the legal limit & Superloads require custom routing and can cost hundreds of dollars.

When Is a Single Trip Permit Required?

A Single Trip Permit is essential if:

  • Your vehicle is traveling across states without IRP registration
  • It has three or more axles, or
  • The vehicle or combination exceeds 26,000 pounds gross weight

In such cases, states require a temporary or trip permit to ensure legal compliance.

Types of Single Trip Permits in Wisconsin
Wisconsin offers several types of Single Trip Permits, each tailored to specific haul scenarios:

  • Single Trip Oversize/Overweight Permit (SS)
  • Sealed Load in International Trade Permit (CS)
  • Radiological Materials – Highway Reportable Permit (HRCQ)
  • Building or Structure from Existing Foundation (SB)
  • Single Trip Factory Built Home Permit (SM)

Each permit type must be requested according to the nature and size of the load, with additional documentation often required for sensitive or heavy hauls.

Texas Single Trip Permit Overview

In Texas, a single trip permit allows the movement of non-divisible vehicles and/or loads that exceed legal limits. Permits are only valid for a single move during specific timeframes from the origin to the destination noted on the permit.
Key Permit Types in Texas Include:

  • Manufactured Housing Single-Trip Permit: For homes transported on returnable undercarriage or temporary chassis systems. Valid for one trip not exceeding five days. Requires $300,000 liability insurance and legal ownership of the vehicle.
  • Portable Building Single-Trip Permit: Issued for transporting portable structures exceeding standard limits. Loads must be under 14 feet high and 80 feet long to qualify. Larger structures require a general single trip permit.
  • Super Heavy Single-Trip Permit: Required if the vehicle/load exceeds 254,300 pounds gross weight or does not meet axle spacing and weight limits. If the load weighs over 200,000 pounds with less than 95 feet axle spacing, this permit becomes necessary.
    Route Inspection Certification is required for dimensions exceeding:
    Width: 20 feet
    Height: 18 feet 11 inches
    Length: 125 feet

Florida and California: Additional State Insights

California Single Trip Permits
California regulates single trip permits for oversize loads with defined corridor color codes:

  • Green, Blue, and Brown Routes: Max width up to 15 feet without escort
  • Yellow Routes: Allow loads up to 16 feet wide

Permits are valid for up to seven days, and pilot car requirements depend on the route, structure clearances, and load dimensions.
Florida Single Trip Permits
Florida requires a single trip permit for vehicles exceeding:

  • Width: 8 feet 6 inches
  • Height: 13 feet 6 inches
  • Length: 75 feet for combinations

Permits can be issued for up to five days, and escort vehicles may be mandated based on load measurements and road conditions.

We Handle Permits for All States & Provinces: Fast, Affordable & Compliant Single Trip Permits

When it comes to transporting oversize or overweight loads, staying compliant is critical—and that’s where we come in. Whether you need a Single Trip Permit for an oversized vehicle or a Temporary Trip Permit for IRP/IFTA compliance, we offer fast, affordable, and reliable permit services for all U.S. states and Canadian provinces. Our team handles the entire process so you don’t have to worry about paperwork, deadlines, or penalties.
With over 15 years of industry experience, we help truckers move heavy equipment, wide loads, and non-divisible freight safely and legally. From state-specific regulations to permit costs and validity, our expert support ensures you’re always road-ready on time and within budget.

Why Choose Us?

Choosing the right permit agency can make all the difference when it comes to time, cost, and compliance. Here’s why truckers across the U.S. and Canada trust us:

  • Permits Starting from Just $25 Competitive pricing with no hidden fees
  • Fast Turnaround Same-day processing available for urgent hauls
  • All States & Provinces Covered One-stop solution for U.S. and Canada
  • 15+ Years of Industry Experience Proven track record in trucking compliance
  • Online & Hassle-Free Quick digital forms, no paperwork headaches
  • Expert Guidance Our team understands every permit type and regulation
  • Dedicated Customer Support Real people, real help every step of the way

Let us handle your permits while you focus on the road ahead.

Ready to get your Single Trip Permit?

Call us today at (630) 222-5770 or (630) 800-3474 Or Apply online and get your Single Trip Permit hassle-free

FAQ'S Asked Questions about Oversize Permits

A temporary trip permit in Oregon typically costs $43 and allows out-of-state vehicles to operate without current registration for up to 10 consecutive days. This permit is ideal for carriers entering Oregon occasionally without permanent credentials.

A temporary permit to enter Canada is issued to U.S.-based commercial carriers or private vehicles operating temporarily within Canadian provinces without full registration. These permits allow legal entry for a specific purpose, duration, and route, and must be obtained before travel.

Temporary trip permits can be ordered online through tour website compare transport llc or by calling us at (630) 222-5770 or (630) 800-3474

Each U.S. state has its own rules and fees for trip permits. These permits are required for out-of-state vehicles that lack proper registration or fuel tax credentials. Fees, durations, and restrictions vary, so it’s essential to check individual state requirements before travel.

• Single Trip Permit: Used for hauling an oversize or overweight load
• Temporary Trip Permit: Used when entering a jurisdiction and you are not register in IFTA and IRP

The cost of a single trip permit varies by state, typically ranging from $10 to $60. Additional fees may apply for overweight or oversize loads. This permit allows one-time travel through a state or region for non-reducible loads or temporary movement.

Temporary trip permit fees depend on the issuing state or province. Most permits range between $10 and $50 and cover short-term travel, often for 3 to 10 days. These are intended for vehicles without current registration or IFTA credentials.

A Texas One Trip Permit authorizes a single, one-way movement of an unregistered vehicle within the state. It is valid for 15 days and is commonly used for transporting vehicles to a new location, repair shop, or for delivery after a sale.

In California, a temporary trip permit costs $45 and allows a non-California registered vehicle to operate legally in the state for up to four consecutive days. It’s intended for vehicles without IRP registration or those awaiting permanent plates.

Without a special permit, the maximum legal width allowed on most U.S. roads is 8 feet 6 inches. Loads wider than this requires an oversize permit and may also need pilot cars or escorts depending on width, route, and state regulations.

Get a Free Quote

Call Us at 630-222-5770 or 630-800-3474 Now!
And Get Started with a Reliable Trucker & Freight Broker in Illinois